Jushi Self priming trash centrifugal water Pump

Jushi Self Priming Trash Centrifugal Water Pump

Pump designed for economical & trouble-free operation in handling solids-laden liquids and slurries. Pumps feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line.

Model of Diesel pump set	JHSP6                   (Q=340m3/h     H=15m)
Model Diesel Engine	4BTA3.9-G2 (CUMMINS)
Rated Output	50KW
Rated Speed (r/min)	1500
Bore×Stroke	102*120mm
Intake type	Turbocharged
Displacement	3.9L
Compression Ration	16.5:1
Starting Method	24DC Electric motor
Cooling Method	closed water cooling
Governing Method	Electric governing
Cylinders	4
Type	Water cooled, In-line, 4 Cylinder,  4 Cycle, direct injection
Model Pump	SP-6-1
Type	P Type Non-plugging self-priming pump,  sewage pump
Outflow	340m3/h
Head lift	15m
Max solid	76mm
Suction lift	7.5m
Shaft Power	35KW
Inlet diameter	150mm    (6 inch)
Outlet diameter	150mm     (6 inch)
Casing material	Cast iron HT200
Shaft material	40Cr
Bearing	NSK
Impeller material	Ductile cast iron QT380
Sealing method	Alloy/Viton  Mechanical seal
Control System	Auto or Manual operation option;  low/over speed, Battery charger fail ; Urgent shut down; Low oil pressure;  High water temperature; Starting failure;  Loss of speed signal; and so on.     Show wire, voltage, current, frequency,  rotate speed, oil temperature, running time  and so on.
Standard Equipments	Diesel engine: 1set
	Water pump: 1set
	Common base with 8 hour fuel tank:1 set
	Control System: 1 set
	Two wheels trailer: 1 set
	weather casing: 1 set
	8 meter inlet rubber hose
	20 meter outlet rubber hose
	Accessary spare parts: 1 set
	Technic file: 1set