Jushi split case centrifugal pump exported to Romania.

Jushi split case centrifugal pump exported to Ronania

♦  Jushi split case centrifugal pump the casing is axially split,so it allows to maintain the pump without dismantling the pump from the whole water system. It has reasonable compact structure and can rotate clockwise or anti-clockwise to meet the different site condition.

♦  The shafts are sealed by reliable mechanical seal or gland packing.According to different applications,the bearings can be lubricated by grease or thin oil. S pump is excellent split case pump that are widely used in large amount water transportation, water lifting, fire fighting in water plant, offshore project, mining, factories and so on.

split case centrifugal pump

capacity	up to 25200m3 /h
Head	280m
Speed	960-3600r/min
DN Size	Up to 1400mm
Power	0.55~3000kW
Medium temperature	<160°C
Frequency	50~60Hz
Driver	electric motor or diesel engine
Standard	DIN, ISO
Flange connection	DIN, ANSI, BS, JIS, GB

Product Material

Casing	Casing,Cast iron,Ductile cast iron Ni-resistant cast Iron,Cast steel AISI304,AISI316,AISI316L Duplex stainless steel
Impeller	Cast iron,Ductile cast iron Ni-resistant cast Iron,Cast steel Bronze,AISI304,AISI316,AISI316L Duplex stainless steel
shaft	Ductile cast iron,Ni-resistant cast Iron Cast steel,Bronze,AISI304 AISI316,AISI316L,Duplex stainless steel

Product Features

Heavy design axially split case	Double volute casing (size dependent) avoid the radial hit to the rotor so prolong the life time of the pump and more reliable performance. Casing is axially split, so it is easy to do maintenance the replace the parts
Optimized double suction impeller	The double suction impeller has optimized hydraulic performance and high efficiency. The double suction remove the axial hydraulic thrust to the rotor and protect the pump.
Stuffing box and positive sealing	The positive sealing is from the impeller, shaft sleeve and casing ensure non-leakage. The stuffing box is suitable to single mechanical seal, cartridge seal and soft packing
Bearing assembly	Bearings are standard with greased type rolling element from SKF /FAG /NSK / NTN. The oil lubrication type and sleeve type bearing is optional if it is necessary or being requested.
Renewable wear ring	The renewable wear ring is positioned to the casing by the pins, easy to replace. Casing wear ring is optional if it is necessary.
Reinforced shaft	The shaft is designed for heavy duty service driving and suitable for constant speed and variable speed driver.
Shaft sleeve	Stainless steel or bronze protect the shaft. There is O-ring between the sleeve, impeller and shaft.

Parameter Data

Model	Capacity	Head	Motor
	m3/h	m	Motor	power kw
350S44	1260	44	Y355M1-4	220
			Y3553-4	220
350S44A	1116	37	Y315L1-4	160
350S75	1260	75	Y4001-4	355
350S75A	1170	65	Y355L1-4	280
			Y3555-4	280
350S125	1260	125	Y4502-4	710
500S13	2020	13	Y315L1-6	110
500S22	2020	22	Y355M3-6	200
500S35	2020	35	Y4002-6	280
500S59	2020	59	Y4501-6	450
500S98	2020	98	Y5002-6	800